- Air Infiltration Sealing
- Blower Door Testing
- Duct Blaster Testing
- Duct-EZ HVAC Sealing
- Energy Calculations / Modeling
- General
- Home Energy Audits
- Insulation Inspections
- Manual JDS HVAC Calculations
- Mass Save Program
- Rebate Incentive Opportunities
- Services
Anyone building a new residential home in America. Also, depending on state homeowners may need this for renovation work being done to home.
Yes. In Massachusetts, we assist builders and homeowners in navigating and applying for Mass Save® rebates and no-cost upgrades. We also support rebate access in Maine, New Hampshire, Michigan, and Ohio, where available.
Typically, we require about 2 days lead time to schedule an audit and complete the necessary tests (blower door, duct blaster) depending on the home’s size and complexity. You’ll receive all required documentation for code compliance and any applicable rebate submissions. On site inspections typically take one to two hours depending on the size of the home.
Both. We support builders, contractors, and developers and work directly with homeowners for insulation inspections, rebate documentation, and system efficiency testing.
Our energy audits are tailored for new home construction and renovations. We inspect your insulation, HVAC efficiency, air sealing, and ductwork design to ensure your home is energy code compliant and built for long-term comfort and savings. If needed, JB’s Home Energy can do thermal imaging on a home to see where air leaks are coming from.
Manual J (load calculation), Manual D (duct design), and Manual S (equipment sizing) are required for building code compliance. They ensure HVAC systems are properly sized and designed for maximum efficiency and comfort. JB’s Home Energy specializes in providing these reports for new construction projects.
A blower door test measures how airtight a home is. It’s required in most states for new construction code compliance and helps identify leaks in hopes to reduce drafts, moisture issues, and energy loss. We provide these tests as part of our audit and inspection package. This test typically occurs at the very end of construction.
Our insulation inspections are done before putting up a drywall to identify missing or poorly installed insulation. This ensures your home passes inspection and performs efficiently for decades. It’s also often required to qualify for rebates or meet stretch code standards.
Duct-EZ® is a high-performance spray-on duct sealant that reduces air leaks in duct systems. It improves airflow, energy efficiency, and system performance- this vital for builders to ensure code compliance while testing a duct system. Our team applies our Duct EZ material to the HVAC system in any areas it could possibly leak.
We seal gaps, cracks, and joints in your home’s structure using advanced materials. This improves indoor air quality, reduces energy costs, and helps meet blower door test thresholds for code compliance.
- Energy calculations: Builder has prints ready to get a new home started and needs to get the documents for his permit. He sends us the blueprints for the home with a “builder information sheet” telling me what he is going to be putting into the home as far as insulation, windows, doors, HVAC is concerned. We then model out the home and make sure that it is meeting code requirements. Once that is complete we give him the paperwork needed to get his permit.
- Thermal Bypass Inspection (Insulation inspection): Once the home is insulated we come in and make sure that everything that was modeled in the home was actually installed. We document insulation, window, HVAC, specs and ensure that the home will pass the blower door and duct leakage test once drywall is put up.
- Blower Door & Duct Leakage Test: A blower door and duct blaster test is required on every new home in the state in order to get an occupancy permit. The best time to do a blower door test is once the carpet in the home has been laid and the thermal envelope is sealed. This test ensures that the air leakage in the home and duct system is at an acceptable level for code requirements.
The team at JB’s Home Energy would be glad to determine whether or not your home qualifies from incentives from rebate programs across the country. Call our team at (567) 742-4410 and an expert can help get you started in the right direction, explain program requirements and get you set up for incentives. To make this process quicker and easier on our team please fill out the questionnaire below and someone from our team will assist you in a timely manner.
Yes, they vary by location. We help ensure your project complies with the latest local and state building codes in all our service areas. Depending on where you are our team can determine what is needed to build a home within code regulation in your state.
Call us at (567) 742-4410 or request an estimate. We want to learn about your project, schedule the appropriate testing or design work, and help you meet compliance, performance, and rebate goals—on time and on budget.
We assess insulation, air sealing, HVAC sizing, ventilation, and perform blower door testing to evaluate your property’s or building’s energy performance.
Yes. Many programs require an audit to determine eligibility and verify that improvements were made.
Audits typically take 1–3 hours depending on the size and complexity of the property.
Yes. Energy-efficient properties and buildings often have higher value and faster sales. An energy audit can help document that efficiency.
Absolutely. We offer both residential and commercial energy audits to builders and contractors to meet building code and performance standards.
Air sealing, duct sealing, insulation, HVAC upgrades, and energy modeling are among the top qualifying services.
We provide all required documentation (including test results and modeling reports) to help you submit and get approved quickly.
No. Many programs also offer rebates for energy-efficient retrofits and home upgrades.
Rebates vary, but typical savings range from $200 to over $2,000 depending on the project and services used.
Start with a home energy audit or code-required testing! We’ll guide you from there.
Before drywall or interior sheathing is installed—usually right after insulation is placed.
They’re often required for rebate programs and are highly recommended to pass blower door testing.
We look for insulation gaps, compression, misalignment, missing coverage, and improper contact with air barriers.
Yes—correct insulation installation is a key requirement for qualifying the Mass Save® Program rebates and incentives.
Most take 30–90 minutes depending on project size and access.
Before drywall installation and ideally before final blower door testing. It’s also effective in existing homes with comfort or draft issues.
Yes—air sealing directly improves airtightness, which is essential for passing code-mandated blower door tests.
Common areas include attic accesses, rim joists, wall penetrations, top plates, electrical boxes, and more.
Yes, especially when paired with insulation upgrades and verified through testing.
Most projects take a few hours to a day depending on the size of the property.
Yes—especially where energy code and performance standards apply (like IECC or stretch codes).
An audit is done on an existing structure. Energy modeling predicts energy use before or during construction.
If you’re doing major changes (HVAC, insulation, windows), modeling is often required for compliance or incentives.
Yes—many rebate programs require a modeled energy baseline and post-improvement verification.
We typically provide energy modeling reports in 2–3 business days.
Yes. Most states, including MA and MI, require Manual J, D, and S reports to approve permits and confirm energy efficiency.
- Manual J = Load calculation
- Manual D = Duct design
- Manual S = System selection
Together, they ensure correct HVAC performance.
Builders, HVAC contractors, architects, and homeowners involved in new construction or major renovations.
Absolutely! Programs like Mass Save® require accurate documentation to validate system performance and efficiency upgrades.
We typically deliver Manual JDS reports within 2 business days.
It pressurizes the duct system to find and measure air leakage, helping you locate problems that affect efficiency.
It’s often required for new construction, additions, or HVAC replacements, especially in areas following the 2015+ IECC.
Yes! Programs like Mass Save® require passing leakage thresholds to earn rebates and incentives.
Most duct blaster tests take 1 to 2 hours, depending on system size and layout.
Absolutely! We offer Duct-EZ HVAC sealing to quickly and efficiently seal ductwork from the inside.
Yes. Most local building codes (including IECC) require blower door testing for newly built or heavily renovated homes to verify airtightness.
Typically 1–2 hours, depending on the size and complexity of the property.
It measures the air changes per hour (ACH) at 50 pascals of pressure—showing how much air is leaking from the home.
No—JB’s offers quick turnaround and can provide test results the same day to keep your project on schedule.
Yes! Many energy programs and utility incentives require blower door testing as part of the qualification process.
Duct-EZ seals the entire duct system from the inside, reaching leaks that tape and mastic can’t.
Yes. Duct-EZ is ideal for both new construction and retrofits—no cutting into walls required.
Absolutely! The sealant is safe, low-VOC, and tested to meet industry standards.
Yes. Duct-EZ HVAC sealing helps meet code requirements for duct leakage and qualifies you for rebates.
Most applications are completed in a single day with minimal disruption.
Builders, property owners, and homeowners in Massachusetts who meet the program’s eligibility requirements for new builds or energy-efficient upgrades.
Commonly covered upgrades include insulation, HVAC equipment, air sealing, and lighting improvements.
Savings vary by project but can reach thousands of dollars depending on the scope and measures installed.
No, but completing multiple upgrades often maximizes your rebate potential.
We manage testing, documentation, and rebate applications so you can focus on your build or renovation.
What Our Clients Say
Trusted by builders. Real reviews from verified and satisfied customers.
EXCELLENTTrustindex verifies that the original source of the review is Google. I had an excellent experience with JB’s, knowledgable and on point, i would recommend everyone out there.Posted onTrustindex verifies that the original source of the review is Google. Easy to work with, prompt and knowledgeablePosted onTrustindex verifies that the original source of the review is Google. Josh and his team have been super responsive, helpful, and flexible throughout the process. They have exceeded my expectations and hope they do for you too!Posted onTrustindex verifies that the original source of the review is Google. last year. I was enrolled in the MA Save Energy/ Residental Renovation program and during that process JB Home Energy worked with me throughout the Renovation from beginning to end to make my home more energy efficient and I can report that as a result, my house is incredibly energy efficient JB Home Energy was super helpful, acomodating and professional. they made process seamless, five stars !Posted onTrustindex verifies that the original source of the review is Google. Working with JB's Energy over the past over the past 6 years has been just amazing. There staff are so responsive and always work with us to find the best solutions to meet the energy requirements of the different towns we build in. As an architect and builder i highly recommend using there services.Posted onTrustindex verifies that the original source of the review is Google. I needed a manual J completed for an application submission and they were very quick on the turn around for it.Posted onTrustindex verifies that the original source of the review is Google. AWESOME company... they follow up, are on top of the codes and are always helping me out. They make my life easier.Posted onTrustindex verifies that the original source of the review is Google. Very professional and cooperative crew able to work with a continuingly evolving construction schedule, very happy with their work!Posted onTrustindex verifies that the original source of the review is Google. Josh was exceptional to work with. Guided me along the process. Their money back guarantee is 100% legit and quick! Highly recommend, I will be working with JB in the future! You literally have nothing to lose!Posted onTrustindex verifies that the original source of the review is Google. JB did a whole house assessment and rebate for me. I had a total renovation so it was a long time from pre eval to post eval. They stayed on it, did a good job and I received a four figure rebate.
